Basic Information:

Number of LEDs - 48/pcs
Connector Model - PH2.0 x 2
Voltage - 5V
Current - 2A
 
In the Box: 2PCS
LED Backlight Board -  2PCS
PH2.0 Power Connection Cable -1PCS
USB to PH2.0 Power Cable with ON/OFF Switch - 1PCS

In the Box: 4PCS
LED Backlight Board - 4PCS
PH2.0 Power Connection Cable - 3PCS
USB to PH2.0 Power Cable with ON/OFF Switch - 1PCS

Considerations:
- Smaller nozzle sizes and lower layer heights are essential to achieve better printing results. We suggest using 0.2mm or 0.4mm nozzle sizes and layer heights between 0.08mm and 0.12mm. If you use other tools to generate the lithophane model, you may need to configure the print profile to optimize the result. Please check CMYK Lithophane Printing Guide on Wiki.
- Due to the limitations of printing layers and resolution, there may be some color deviation between the actual image and the lithophane prints.
- To prevent warping, the recommended heated bed temperature is between 45-50℃.